Electronics Engineering

PCB Thermal Relief Pad Area Calculator

PCB Thermal Relief Pad Area Calculator engineering calculator.

Quick Answer

Calculate PCB Thermal Relief Pad Area Calculator

Calculator

Thermal Relief Pad Area (m²)
—

Result Interpretation

PCB Thermal Relief Pad Area Calculator computes Thermal Relief Pad Area in m^2 using the defined engineering formula and the input values provided.

Worked Example

Verified calculation

Given:

  • Number of Thermal Spokes = 4
  • Spoke Width = 0.0002
  • Pad Diameter = 0.002
  • Spoke-to-Pad Clearance = 0.0003

Expected Result:

  • Thermal Relief Pad Area = 2.0734511513693E-6

Engineering Interpretation:

Under the given input conditions, the calculated result is: Thermal Relief Pad Area = 2.0734511513693E-6 m^2.

The actual numerical result is computed by the Runtime engine using the persisted tool definition. The values shown here come from automatically validated test cases.

Formula / Method

thermal relief pad area = (pad diameter * pad diameter - number of thermal spokes * spoke width * (pad diameter - spoke-to-pad clearance)) * 0.25 * 3.14159265358979

Formula family: formula_electronics_pcb_thermal_relief_pad_area_calculator

Variables

SymbolLabelRoleDescription
pad_diameter Pad Diameter INPUT Pad Diameter
spoke_count Number of Thermal Spokes INPUT Number of Thermal Spokes
spoke_width Spoke Width INPUT Spoke Width
spoke_clearance Spoke-to-Pad Clearance INPUT Spoke-to-Pad Clearance
thermal_relief_pad_area Thermal Relief Pad Area OUTPUT Thermal Relief Pad Area

Calculation Steps

  1. Enter the pad diameter in m.
  2. Enter the number of thermal spokes in 1.
  3. Enter the spoke width in m.
  4. Enter the spoke-to-pad clearance in m.
  5. Step 1: Compute thermal relief pad area.
  6. Read the thermal relief pad area (m^2) from the results.

Engineering Summary

Calculate PCB Thermal Relief Pad Area Calculator

Frequently Asked Questions

What does this calculator calculate?

The PCB Thermal Relief Pad Area Calculator estimates Thermal Relief Pad Area based on the input parameters you provide

Why is pad diameter important in this calculation?

pad diameter is directly proportional to thermal relief pad area. When you enter pad diameter in m, the calculator uses it in the engineering formula to compute the output

How should I interpret the result thermal relief pad area?

The calculator outputs thermal relief pad area in m^2. The result is computed directly from the input values using the defined engineering formula

What units should I use for the inputs?

Enter each value in the units shown next to the input field: Pad Diameter (m), Spoke Width (m), Spoke-to-Pad Clearance (m). Make sure all inputs use the specified units for consistent results

What assumptions does this calculator use?

This calculator uses automatically validated engineering formulas. Results are approximate and should be validated against site-specific conditions, applicable codes, and professional engineering judgment

Related Tools

Browse More Tools

Explore the full index of engineering calculators on this vertical site.